Free Access
Erratum
This article is an erratum for:
[https://doi.org/10.1051/limn/2022002]


Issue
Int. J. Lim.
Volume 58, 2022
Article Number 9
Number of page(s) 1
DOI https://doi.org/10.1051/limn/2022010
Published online 04 August 2022

Some corrections were missed in the production process of the above article, and the publisher apologizes for the inconvenience this is causing.

On page 5, the caption of Table 3 should be:

Tolerance (Tol) and optimum (Opt) values for the nine most common species against the variables measured from each sampling site. Abbreviations: Count (numbers of species occurrence), Max (maximum numbers of individuals), N2 (Hill’s coefficient or measure of effective number of occurrences), dissolved oxygen (DO, mg l-1), electrical conductivity (EC, mS cm-1), water temperature (Tw, °C), redox potential (ORP), elevation (Elev), sodium (Na 2+, ppm) in water, magnesium (Mg2+, ppm) in water, calcium (Ca2+, ppm) in water, fluoride (F–, ppm) in water, chloride (Cl–, ppm) in water, total phosphate (T.PO43–, ppm) in sediment.

The sentence mentioning Table 3 should be:

Among the species, N. neglecta showed a high positive correlation with elevation but Ht. salina displayed a positive correlation with Mg and EC. Individual species revealed different levels of tolerance and optimum values for different environmental variables ( Tab. 3).

On page 6, the caption of Table 4 should be:

Table 4. Elemental atomic percentage (%) values from the carapace surface of 17 ostracod species according to EDX analyses. Elements found in trace amounts are listed under ‘Others’. Numbers written in parentheses indicate the number of sampling site.

Abbreviations: C(Carbon), O (Oxygen), Ca2+ (Calcium), Mg2+ (Magnesium), Na2+ (Sodium), Sr (Strontium), P (Phosphate).

Cite this article as: Çapraz Ç, Külköylüoğlu O, Akdemir D, Yavuzatmaca M. 2022. Erratum to: Determining effective environmental factors and ecology of non-marine Ostracoda (Crustacea) in Giresun, Turkey. Int. J. Lim. 58: 9


© EDP Sciences, 2022

All Tables

Table 3

Tolerance (Tol) and optimum (Opt) values for the nine most common species against the variables measured from each sampling site. Abbreviations: Count (numbers of species occurrence), Max (maximum numbers of individuals), N2 (Hill’s coefficient or measure of effective number of occurrences), dissolved oxygen (DO, mg l-1), electrical conductivity (EC, μS cm-1), water temperature (Tw, °C), redox potential (ORP), elevation (Elev), sodium (Na2+, ppm) in water, magnesium (Mg2+, ppm) in water, calcium (Ca2+, ppm) in water, fluoride (F, ppm) in water, chloride (Cl, ppm) in water, total phosphate (T.PO43−, ppm) in sediment.

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.